You are currently viewing How to Use a Motorcycle Jack – The Ultimate Guide

How to Use a Motorcycle Jack – The Ultimate Guide

If you have a motorcycle, then you need to know how to use a motorcycle jack. This is the only way to safely lift your bike off the ground for repairs or storage. In this guide, we will walk you through the steps of using a motorcycle jack safely and effectively. We will also provide some tips on how to get the most out of this handy tool!

What is a motorcycle jack, and how does it work?

A motorcycle jack is a specialized lifting device used to raise motorcycles off the ground. Unlike a regular floor jack, a motorcycle jack has a long arm that extends out from the base, allowing it to reach under the motorcycle without lifting it first. This makes it much easier to position the jack underneath the bike, which is especially helpful when lining up a lift with limited space. Once the jack is in place, you need to pump the handle to raise the arm and lift the motorcycle off the ground. Some motorcycle jacks also have built-in wheel chocks or leveling devices that can make it even easier to work on your bike.

When to use a motorcycle jack

There are a few different situations where you might need to use a motorcycle jack. If you’re doing any work on your bike that requires lifting it off the ground – such as changing the oil or tire – you’ll need a jack to help support it. You might also need to use a jack if your bike has broken down and you need to tow it. In either case, it’s important to choose the right type of jack for your motorcycle. A hand-operated jack should be sufficient if you have a small bike. However, for larger bikes, you’ll need an electric or hydraulic jack. These are much more powerful and can lift heavier bikes with ease. Just follow the manufacturer’s instructions carefully to avoid damaging your bike.

How to use a motorcycle jack safely

Before you start using your motorcycle jack, it’s essential to ensure that it is appropriately positioned and secured. First, extend the jack to its full height and place it to center the lifting arm under the bike. Next, use the ratchet handle to slowly raise the jack until the bike is lifted off the ground. Once the cycle is suspended in the air, use a pair of jack stands to support it. Finally, lower the jack until it is flush with the ground. This will ensure that your motorcycle stays stable while you work on it.

When you’re finished working on your bike, reverse the process to lower it. Always make sure that all nuts and bolts are correctly tightened before riding, and never attempt to lift more than half of the weight of your motorcycle with the jack. You can use your motorcycle jack safely and effectively by following these simple guidelines.

The steps for using a motorcycle jack

If you’re doing your motorcycle maintenance, you’ll need to know how to use a jack. Here are the basic steps: 

First, find a level spot to park your bike. You don’t want it slipping off the jack while working on it. Once you’ve found a good place, position the jack under the cycle. Then, crank the jack-up until the bike is lifted off the ground. Make sure it’s high enough that you’ll be able to work on it comfortably. 

Lower the bike back onto the ground and remove the jack when you’re finished working. That’s all there is to it! With a bit of practice, you’ll be jacking up your bike like a pro.

Tips for getting the most out of your motorcycle jack

A motorcycle jack is a tool that every rider should have in their arsenal. It makes it easier to perform maintenance on your bike, but it can also be a lifesaver if you find yourself stranded on the side of the road. Here are a few tips for getting the most out of your motorcycle jack:

  • First, make sure that the surface you’re placing the jack on is level and firm. A wobbling jack is dangerous, and can easily cause your bike to fall over.
  • Next, take a look at the position of your bike’s center of gravity before you start jacking it up. You want to be sure that the bike is balanced and won’t tip over when you start lifting it.
  • Finally, always use caution when working beneath a lifted motorcycle. Use jack stands to support the weight of the bike, and never get underneath it without someone else there to help in case something goes wrong.

By following these simple tips, you can rest assured that your motorcycle will be safe and stable while you work on it. So next time you need to change a tire or perform some other type of maintenance, don’t forget to break out the jack!

FAQs about motorcycle jacks

If you’re a motorcycle owner, you might be considering purchasing a jack. Here are answers to some of the most frequently asked questions about motorcycle jacks:

  1. What is a motorcycle jack?

A motorcycle jack is a lifting device that can raise your bike off the ground. This can make it easier to perform maintenance or repairs or move your bike around.

  1. How do I choose the proper motorcycle jack for my bike?

The type of motorcycle jack you’ll need will depend on the weight and size of your bike. Be sure to check the weight limit on any jacks you’re considering before purchasing.

  1. How do I use a motorcycle jack?

Most motorcycle jacks operate similarly, but it’s always best to consult your owner’s manual for specific instructions. You’ll need to position the jack under your bike and then use the handle to lift the bike. Once the cycle is raised, you can place blocks under the tires for stability.

  1. Are there any safety concerns I should know when using a motorcycle jack?

Yes – always take care when using a motorcycle jack, as there is potential for injury if misused.


A motorcycle jack can be a valuable tool for any rider. By following the tips in this article, you can learn how to use one safely and effectively. With a bit of practice, you’ll be jacking up your bike like a pro! Thanks for reading!





Motorcycle life fan for 30 years and team writer for