You are currently viewing How to Install Motorcycle Grips: The Ultimate Guide

How to Install Motorcycle Grips: The Ultimate Guide

Installing motorcycle grips may seem daunting, but it’s not that difficult. This guide will walk you through the steps involved in establishing new grips on your bike. We’ll also provide tips on choosing the proper grips for your motorcycle. So whether you’re a beginner or an experienced rider, read on for all the information you need to install motorcycle grips like a pro!

Remove the old grips.

Before you can put on new grips, you’ll need to remove the old ones. Start by unscrewing the end cap, if there is one. Then, use a utility knife to cut through the grip tape carefully. Once the grip tape is cut, you should be able to slide the grips off of the handlebars. If the grips are stuck on tight, you can try heating them with a hairdryer or heat gun. Just be careful not to get the bars too hot, as this could damage them. Once the grips are off, you can clean up the handlebars and prepare them for the new grips.

Clean the handlebars and grip area

It will remove any sweat, dirt, or grime built up during your ride. The first step is to wipe down the bars with a damp cloth. Next, apply mild soap to a clean cloth and scrub the bars and grip area. Rinse the soap off with water and dry the bars with a towel. Finally, apply a small bike lube to the bars and grip area to prevent rust and corrosion.

Apply a layer of grip glue to the handlebars, and Place the new grips on top of the glue, making sure they’re aligned correctly

To apply new grips to your handlebars, first, you’ll need to clean off the old grips and apply a layer of grip glue. Once the glue is dry, align the new grips and slowly twist them into place. Please make sure they’re tight, so they don’t come loose while you’re riding. And that’s it! Your new grips are ready for action.

Wait for the glue to dry completely before using your motorcycle again.

Motorcycle riders are a unique breed. We’re tough, we’re independent, and we’re always on the go. But even the most hardcore rider has to stop occasionally to take care of some essential maintenance. One of the most important things to remember is to wait for the glue to dry completely before using your motorcycle again. It might seem like common sense, but it’s easy to get in a hurry and forget. If you don’t give the glue time to dry, it won’t be as strong, and your motorcycle may not perform as well. So next time you’re doing some maintenance on your bike, give the glue plenty of time to dry before hitting the road again.

FAQs on How to Install Motorcycle Grips

Whether you’re a motorcycle enthusiast or a first-time rider, one of the most critical aspects of your bike is the grip. Your grips keep you connected to your motorcycle, and they need to be in good condition for both safety and comfort. But how do you install motorcycle grips? Here are a few FAQs that can help.

Do I need to remove the old grips first?

In most cases, yes. You’ll want to make sure the surface is clean before you start so that the new grips will adhere properly. You can use a product like Goo Gone to remove any residual glue or dirt from the old grips.

What kind of adhesive should I use?

We recommend a high-quality adhesive like Super Glue or Gorilla Glue. Avoid using products like WD-40, as they can degrade the material of your grips.

How do I align the new grips?

Before applying any adhesive, test-fit the new grips to ensure they’re correctly aligned. Once you’re satisfied with the placement, carefully remove them and proceed to the next step.

How do I know what size grips I need?

The size of your grips is dependent on the size of your handlebars. Many riders select grips that are slightly larger than their handlebars for added comfort. However, it is essential to ensure that the grips do not extend too far, as this can make it challenging to maneuver the bike.

How do I choose the proper motorcycle grips for my bike?

The type of motorcycle grips you choose will depend on a few factors, including the size and style of your bike, your riding preference, and any existing handgrips you have on your bike. If you’re not sure which type of motorcycle grips to choose, talk to a professional at your local motorcycle shop. They can help you find the proper grips for your bike.

How do you put on motorcycle grips without glue?

Motorcycle grips provide an essential connection between the rider and the bike. They help to absorb vibrations and protect hands from fatigue. Most motorcycle grips are made of rubber and metal, and they are typically attached to the handlebars using glue. However, it is possible to put on motorcycle grips without glue. One method is to use a grip heater. This tool uses friction and heat to soften the rubber, making it easier to slide the grips onto the handlebars. Another option is to use a stretching device. This tool helps stretch the rubber, making it easier to install the grips without using glue. It is possible to put on motorcycle grips without resorting to adhesive products.

Does hairspray work as Grip glue?

You might be surprised to learn that hairspray can be used as grip glue. While it’s not as strong as some traditional options, it can still provide a decent amount of hold. The best way to use hairspray as grip glue is to mist your palms with the spray. Then, press your palms firmly against the object you’re trying to grip. The spray will help create a temporary bond between your skin and the thing, allowing you to get a better grip. Of course, hairspray is not ideal for all situations. If you need a stronghold, you’ll probably want to go with a more traditional option. But if you’re looking for a little extra grip, hairspray can do the trick.

How do you put on bike grips with hairspray?

Before you can put on bike grips with hairspray, you need to make sure that the surface of the grips is clean and dry. If there is any dirt or oil on the surface, it will prevent the hairspray from adhering correctly. Once the grips are clean, you can give them a light spraying with hairspray. Cover the entire surface, but don’t use it so much that it starts to drip. Then, quickly slide the grips onto the handlebars. The hairspray will help hold them in place while adjusting them to the desired position. Finally, give the grips a final light coating of hairspray to help lock them into place. With a bit of practice, you’ll be able to put on bike grips with hairspray in just a few minutes.

Do I need to do anything else?

Once your new grips are installed, it’s good to take your bike for a test ride to make sure they’re securely in place. You may also want to apply a small bike lube to the bars and grip area to prevent rust and corrosion.

That’s it! You’re now ready to install your new motorcycle grips. Remember to take your time, be careful, and always ride safely. Thanks for reading, and happy riding!


Motorcycle enthusiast and chief writer for